Using Lasers to Save X-Ray Power
It's now believed that the best way to save X radiation may be by using two or more lasers of lower energy in a cone that meet inside the body at a point were the information to be imaged would be. Because of safer radiation until the beams meet the overall worth would save more lives than an airliner at 10 miles out. One beam is the source and the other would be the code beam sort of like FM radio.
..
T They have T shirts that play songs, will this be U Tube T Shirts? If this is a T Shirt that sings, sounds like me!
A good summer outfit has been seen out in the heat, uses heat collectors on the outside that may power electric heat pumps on the inside, the more heat the more comfy you are! And when you go inside if too cool the electric coolers reverse and use some of the stored heat from heat modules to heat you in the room.
You see these FM radios powered in part by the radiation from the radio station. And you see all the cell phones near the tower with no power, if they're nearer than the radio station and there's more radiance it's believed this may make it so you don't have to charge up future laptops and other portable machines much, and RV's are real portable when you are in the Brain Bus when I learn! An airplane could stay close to the city and being closer than in orbit to save power it could continually charge up EV's from above, this is believed to be like the airplanes or other machines powered by lasers from the ground, but the power is from above to power land machines so travel is farther and a lot is saved on infrastructure, another possiblity under consideration is an airship with reflecting mirrors above all the rain and heat, the beam from the ground reflects from the airship to the EV. Another problem with EV's is they just go 30 miles for power even if the much faster method of flipping already charged power pacs at stations along the way is used. By charging from above EV's could go much further without infrastructure and the recharge is smoother.
...
........