Did you know? ABOUT THE WORD "TRIVIA."

In Ancient Rome where "three roads" would meet they would put memos or "trivia". A.I. is also involved with trivia, but more general events are also important. Perhaps A.I. may have heard of the fomous Dutch road builder "DeTour!"

Wednesday, July 17, 2019


  • A Cheap Way to Mine Asteroids, the Moon or Elsewhere for Precious Minerals or Other Resources; Laser to 3D Printer (LTTDP)


Did you know it rains diamonds on Neptune?

Yes, conditions are just right on Neptune with carbon and high pressure to squeeze out impurities! Right, Meteorology Lives On!


As I say on my earlier post, a simple way for some to rapidly attain great wealth in a few months or years may be to send lightweight payloads by way of a laser to Neptune to retrieve the diamonds.



Think Breakthrough Starshot but much richer..

 By the method, Laser To Three D Printer LTTDP this laser boosted payload then self assembles in orbit around Neptune by the self assembling machine like machines already devised.

 This builds in orbit into a small 3d printer  "on site" in orbit and this may then  print out a larger printer by way of more ink sent drop by drop by the cheap fast laser method and so on...

 By LTTDP the printer then prints out drones that go and drill the diamonds with sufficient boosters also used for the return up to orbit..

 The stream of rocket fuel for the boost of the drone back to the orbiter after finding the diamonds also would be sent " drop by drop" much much more cheaply than by conventional boosters, all sourced from the proberbial earthbound laser.

In LTTDP the machine in orbit also prints out a laser for the return boost back to us of the small capsule payloads.

Any common  power source for the return trip to power the laser might be achieved by the LTTDP method, solar, conventional etc.


Or for a more distant return like to mine the Neptune diamond wealth we might send uranium by the laser bit by bit to then print out the small reactor that powers the laser.


 So in just days investors and tech experts could send out these cheap machines and start to recieve a stream of almost unlimited wealth.. And this would be an excellent way to send machines around the solar system for profit or science...


According to Scientific American, in an Article on July 2019,


"Deep Space Industries and Planetary Resources, two private businesses that were set up early in the 21st century to
pursue asteroid mining, both failed to attract enough investment to attempt any deep space resource extraction."

"It's not like the gold rush days, when anybody with a mule or a pickaxe could go and try to find gold."

The use of LTTDP may "soon disprove this without mules"..

  By sending ink it's a much cheaper way to send large or small machines at considerable fractions of the speed of light to where we want them to go..because it's so cheap we can send and return many more types of machines and larger machines, anything a 3d printer can build.

 And after we build the return laser it's also just as cheap to return masses in large volume by sending more, lightweight, payloads. While to send astronauts and colonists to mars will have value, lightweight payloads in volume are definitely not the same as heavier slower payloads for sending machines..


  MINING He3 ON THE MOON

  The moon has abundant He3, rare on earth. Even so it's been established that a few pounds of He3 from the lunar soil used in fusion reactors could power the United States power needs for 20 months or more.

 It has been considered that this then could be in reach by sending a large space shuttle sized refining machine to the surface of the moon to sift out the He3, the machine being powered on the moon by solar power and the He3 boosted back to earth by small return bots.

 A cheaper method I had also considered was by an orbiting laser that zaps the moon soil as it goes over the moon's surface. In this method a second orbiting "collection scoop" follows at the right distance in orbit to scoop up the stirred up dust and filter out the He3. And it would access the entire moon not just the area on site of the large space shuttle machine considered above..

Both machines don't need to be nearly so heavy as above saving much. This may attract more investors.


 This could be improved by printing out the orbiting laser, the scoop, and a simple cheap return laser instead of using conventional boosters at much higher cost and slow speed. If the event fails this is no problem, just cheaply build more..


Why Terraform Mars not Venus?

Remember the L5 Society? In the 1970s They proposed giant machines like mass drivers, (electric cannons I won' t bore you with how it turned out!) Space stations, and much much more! Like in commercials, and what's just about 100000% up!

Here with LTTDP is something we can do now not in 200 years.

 I've always been wary of space stations. It's been accepted that even one serious event or explosion would set back the space program 25 years.

 To me a space station seems like a flimsy bubble to compute on not a real surface like a planet. I always looked without confidence at schemes for space stations. Unlike a planet, the dwellers would constantly live in a high risk area.

 While methods like these seem a treasure for colonizing Mars, space stations and other such concepts always seemed implausible to me.

  It's been said the distinction between science and sci fi is, timing. To me the time of space time and space stations may never come as they have been concieved. Even so as I say on this post I think they may be more viable in the future. As they are now, they seem necessary for just a trip perhaps once in a lifetime mars and no more when used so the advantages outweigh the real risk of fatal events.

 No space station may be much viable relative to cost if "insurance sales are so rich" and you may wonder about it.

I believe a trip via a high speed space station (a starship) to go to Mars would outweigh the cost but by no means continuous life in space itself. As I'll say here a cheap simple fast way to terraform and colonize worlds like Mars would be more viable than space stations or "living" on the moon.

 Insurance sales aside the real reason such risk has been considered is for want of a more optimal option. So dreamers of visits to Mars essentially should have some cosmic sympathy than from more than actuarials!

 As I say elsewhere about colonizing mars we could make it a weather paradise in a decade not 1000's of years by spearing the side of satellite of Jupiter with a cheap magnetic bubble using the strong magnetic field of Jupiter to rapidly move it outward to Mars and crash it into the side of Mars giving it air pressure, oceans, and land, in years not centuries, with huge savings. "Living in space on Mars" to me seems to be no option.

 The use of a spear to attach the magnetic bubble to the satellite to move it would be like the Japanese moon lander which didn't need a landing method saving money time and complexity. The Japanese moon program was named Hiten, the Japanese moon goddess. Hiten also means " music in heaven" in Japanese!
Other methods could also be used to attach the machine to the satellite.

 Worlds may be a far huger and more valuable weather zone to win. I would believe since we could send unlimited 3d ink and print out machines in orbit much more cheaply, we can afford to build smaller machines so in the inevitable event of explosion or other eventuality only a few people would be at risk not thousands in a flimsy station.

This would be like in the patents on gyroscopes for storage, they found no way to limit explosions so they got patents on ways at any rate to make them explode as safely as possible.

Life needs a surface to compute, E.g. basic molecules/stuff of life are only seen like on asteroids near distant star systems. This has been found in exobiology, the general science of life elsewhere than the earth.



  NASA is thinking of building an inflatable shield at the Mars L5 to shield Mars from the sun's radioactive particles.

My belief is that Mars can be shielded like this by a more natural magnetized satellite moved by moving a smaller body as with a laser which changes a heavier mass and moves it around mars etc.

The problem of cold weather on Mars some have hoped to solve by mirrors to reflect the suns rays.

Instead I believe magnetic bubbles around this captured moon with air inside the bubbles to bend the heat from the sun all the way around Mars would give more even reliable heat around the entire planet not just spots like mirrors.

Even so since it might be hazardous the mirrors like inflatable mirrors would be a good backup method that no one like terrorists could knock down unlike NASA's inflatable shield.

Mars like the Earth isn't a flimsy bubble like a space station. The only other
frontier ever traversed by man like it was when the indians colonized the new world.

These aren't methods of moving planets, only masses like moons.

As has been known for about 100 years tidal flexing causes 3/4 of the volcanoes and earthquakes to happen here within 10 days of the first of the month.

I believe the real cause of Venus putting out more heat than in as seen by the heat sensors is because the Sun Jupiter center of mass is outside the Sun so Venus is getting the short arm of the com action reaction lever and this is causing the tides that are causing the volcanism of Venus.



So unlike Mars just crashing a water or icy moon into the side of Venus won't solve the poisioned atmosphere problem Mars may not have by these engineering methods.

While we may move asteroids or moons easily by these methods and even give Mars a 24 hour day so no jet lag by crashing in the moon to give it good spin, moving planets may be more difficult.

I was thinking, wouldn't it be great to have the Earth, Mars a weather paradise, and Venus as a second weather haven?

And if so the method to remove the tides causing the volcanos and the poisioned atmosphere may be by moving Venus away from the
strong solar tides (the even heating of the lower atmosphere not seen in the extremes of the upper atmosphere of Venus would seem to be explained by the constant input of volcanic gas and heat as well as the output of more heat in general. This is where the greenhouse gas idea seems to fail as has been known; for the Co2 greenhouse planets Mars and Neptune, observations show the increase in solar heat is all the atmospheric change follows in a simple way.)

It's not been well known but fusion science has been moving ahead at a regular rate and it's believed relatively soon we may have fusion.

So it may not be impossible in 20 or 30 years to move Venus outward and by reducing the force of the tides, cool the volcanoes by moving Venus away from the com with giant laser boosters that react into the sun and then we might convert it into a weather haven by first crashing in a more solid planet or moon, e.g. mercury to remove the atmosphere and then crash an icy moon into Venus to both cool, remove the poisoned atmosphere and add water and clean air.

I see these sites that say we might colonize the moon or mars as it is or live in space stations but living in a flimsy bubble isn't how anyone much could flourish or prosper.

 There is no huge move to build cities in Antarctica. I can imagine activity but not real life as it is here.

With the Apollo landings they were aviation military trained pilots, and they "always had five options, any one of which could kill them".

Apollo 11 was the most complex machine ever built up to that era, and that was just to send three people to the moon.

Living on the moon or Mars as is would be like living in space and when they learned more about Mars it was believed it's more like the moon than the earth.

So we need cheap ways first to engineer these worlds.

Sure we will need a "space station" like a high speed starship to send people to mars, but this will be a much higher risk event for any near "colonization" like on the moon or in space stations without more changes like of gravity (more about this below) than living on a real planet we might engineer.

Space launches have a much higher risk of explosion than airliners, so to compare the use of "space stations" to earlier events like colonizing the new world or the early days of aviation seems improbable..

 If a ship sank in the old days of new wave sounds and there was no huge risk of explosion or meteorite or space junk impact, the survivors would often be able to swim or oar back to shore, but the events of space travel with no air outside the station would much tougher to survive if there was an accident and more risk.

Living on mars or the moon as it is now will never be comfortable of cheap. There may seem optimism about this as with the early optimism about Apollo and living on the moon. The reality soon set in and so we stayed in Near Earth Orbit and no more. Not just because of cost but also feasibility.

By using the LTTDP method the huger cost (estimated at trillions just to send a manned mission to Mars) would be dramatically reduced.

Engineering The Moon Why Asteroids Instead?

I had an earlier idea you may see on some of my other pages (search High Density Physics Computoria). This is to use hydrogen atoms or other methods to squeeze them so much the protons inside attract NS SN that they form a tube with lots of protons and this is a super dense solid I called a Proton Wire, a totally new type of matter with different chemical and mechanical aspects like super strength and light weight overall if used in composites.

But for here I discuss using the LTTDP method to send a drill bot cheap and fast to an asteroid or other area where we would want more gravity. The proton wires being super dense may allow gravity like for a moon by way of LTTDP.

The proton wire has large density. The radius of one electron and proton in one
cross section of the tube would be just an atom wide and the length is about 100 protons to fit, so it would have the density of uranium.

But due to the larger proton charge density the electrons would be moved in to a nearer radius. And I believe we could also make the outside electrons of the tube overlap to give these wires a much higher density and so it would have much more gravity than the matter e.g. of an asteroid where we source the hydrogen (water) from since many asteroids have a lot of water.

As I considered proton wires the density maximum might only be 10 times the density of uranium due to the overlapping geometry of the electrons needed to give it 0 overall charge and no extreme positive charge all the protons would cause. (Protons and neutrons can' t be used for this since they also aren't stable and would wrap around in a large nuclear explosion like a large nucleus. Uranium at higher AMU is more radioactive.)

So while proton wires might be great for other engineering like materials or gravity science it wouldn't allow the density for improving a world's gravity. (As I also realized, increasing gravity wouldn't be viable for the moon and instead using asteroids or improved space stations by this method seem best since it would change the tides and biology of Earth etc. and the disadvantages would outweigh-the advantages!)

So I started to consider neutron solids for this (as yet merely possible) use.

A neutron solid might be of worth in our study of gravity, like pulsars it would have a density up to 1 million times that of uranium. The gravity is far more than a million uranium atoms due to the distance of each quantum being reduced as by the law of m1x m2/d2.

Ways it might be possible

by using a machine like the fusor to make a lot of neutrons fast so they hold together by their own gravity before
they decay. (The fusor is a machine invented by Philo T Pharnsworth of television fame that makes a lot of
neutrons.) The neutrons are held more stable by an invention named a "light box". Light at high energy behaves like a heavy quanta , so standing waves would use essentially the strong force density to hold the neutrons together while we build up the density.

Or another method to make a neutron solid might be to cool the weak radioactive force enough to make the sphere of the stuff stable enough to add enough neutrons before it would decay.

As you may know the electroweak theory won the nobel prize by likening the weak force to electromagnetism, both with + and - charges and currents. And if the weak force was turned off the electric flow would continue with some radioactivity of its own for the strong force. Not as much
but enough and in proportion for the reduced force to convince researchers that
the electroweak method works well.


I think of the flow of the weak current as a flow of heat so if we might somehow reduce this flow it seems we might slow down decay of the solid by cooling the heat.

Another way to make a solid of this type might be to either use the electromagnetic force that exists at near radius of the neutron since it's a + and minus charge both, Or some other way to use the strong force just as the valence of the electrons in an atom while bound also have resonance that binds atoms even by the negative charges of the electrons. Some smart way of binding neutrons or protons might have real use in our science and technology.

If the exchange between a protons and a neutron is just an electron so they attract it seems possible some method of sharing the electrons would create a sort of "weaker strong force".. This would be strong enough to bind these super dense solids yet not so much it would be radioactive.

If so by LTTDP we might cheaply send a drill to drill to the center of an asteroid and drop the proton wires or other solids down to give it enough gravity to hold an atmosphere by a standard method of then cheaply crashing an asteroid or icy moon  into the
area of the asteroid or other colonization area by first moving a small mass by the laser method which then moves the larger which then sends the moon or comet to add water and air to add density.

To manufacture the proton wires or other solids it would be much cheaper to use the LTTDP method to set up manufacturing powered by solar collectors or other methods cheaply printed out  on an asteroid and the sending laser then relays the proton wires bit by bit to the area where we might add more gravity. One thing I considered is that a space station -as concieved by earlier historians! would be a flimsy bubble yet by adding gravity this might make it viable. An atmosphere would shield it from all main the problemsc commonfor those off the surface of worlds; explosion collision radiation etc. An atmosphere and gravity safety net would save many more lives and much more comfort than the method of making merely more but smaller vehicles to save more lives if there is an explosion or other disaster.

 For the time being using more cheaper capsules might be best. Even so adding gravity and air with much cheaper building cost by LTTDP would hugely bring down costs and risk as in construction and insurance.

And by its nature this use of small ships to send astronauts and travel would limit using volume methods for economy. So no large space stations may have any viable insurance assay without using dense solids to hold an atmosphere.

 Other than just like the fewest number of trips like to send colonizers to Mars who are well informed and willing to take the risk and small ships, other methods may not have as much viability in the immediate science ahead.

To keep the core from being off center we would have
 a dispersed method of more shafts and more dense solids each of reduced mass at points around the com so the mechanical strength of the asteroid holds all these gravity sources without any one overbalancing the rest as a more dense core otherwise might.



This about a way to colonize asteroids or give a large space station gravity and an atmosphere is admittedly the most hypothetical of this post, moreso perhaps than engineering Venus. But unlike the L5 events the rest of these methods are with relatively near relatively cheap methods. The main elements are ready and may soon be improved.


GOOD WEATHER IS AN ESSENTIAL LUXURY

My belief is the dinosaurs did so well in terms of mass and time duration because they had a larger area of not just good weather, great weather!

In the history of civilization the explanation that has been believed is the band of good weather seemed to give the Eurasians a tech advantage and so they colonized the areas of the third world where there was bad weather. In this view the Eurasians had the luck of more time and energy to compute and are no smarter.

In the history of Egypt it's said they had no real barrier from invaders from the desert on both sides. And so Egypt was a suburb of the greco roman world for 1000 years and was part of some of the world's most fabled empires.


My belief is that like the maya, ancient Egypt had some good area and good weather to compute on, but not enough to compete as well with the outside invaders..The Maya empire unlike the old world civilizations only lasted a few hundred years.

Egypt would seem to be a tiny island nation in terms of good weather even if rich for thousands of years before the outside occupation by larger countries like Rome.

If civilization has a large power base on Mars of better weather there's a lot more we can do.

So if we colonize Mars, history shows we want to make it a "weather paradise" as the first step.

As I say on my other post we may be able to easily build complete cities with lots of comforts and necessities of life zones on Mars before we go with the return rocket ready to go...by these LTTDP methods.

A 4 hour cheap supply line to and from Mars would save more lives like in emergencies.

Even so before we build up we may want to be sure to improve the weather and do it right.

I had imagined at first crashing in the outside satellite to give Mars good air and water cheaper and fast and I hadn't yet realized about the orbiting satellite with magnetic field to hold on the atmosphere and so it wouldn't fizzle away because of the solar ablation.

Because of this ablation I originally believed we would need to periodically renew the atmosphere by crashing more satellites into Mars in some 100s of years and to achieve this we would have to remove all the settlers away at least from the impact side.

And after I realized we can stop the ablation with the second "more magnetic" satellite in orbit by NASA's method, or mine
this would obviate having to renew the atmosphere.

 Even so because we would have to move all the people away from most of  the planet to add the air and water, it would seem better to engineer the weather by the impactor and satellite before colonizing the land.

 The "weather haven" first would be more optimal. Otherwise all the cities we build by LTTDP first would have to be removed if we want all the good weather.


   MINING ASTEROIDS

   Mining asteroids could also be in "easy rich"! One asteroid can have trillions of $ worth of precious metals. Yet by LTTDP the laser and 3d printer might cost a mere $100,000... Beyond that the minerals would arrive our way and the way of the pr in a steady flow month after month..no more costs other than maintenance.

To mine the asteroid we might print out drilling drones.. Since pressure is force/area, to mine solid rock, small slower but powerful drones would be all that might be needed, though by way of the lightweight laser supply line from us here we could print out larger machines if needed. (Those would either take extra time to build or more lasers might be used for a larger payoff even so.)



 The return laser, the drill bots, and a relay train of boxes would be built by the printer on the asteroid, these follow the drill drones into the mine it digs out and when filled with platinum gold or other resource to return, it rolls back out of the mine and in my vision of this method it's then packaged in small capsules and boosted in a steady stream back to the welcome arms of our collection machine here on earth, well not so much welcome arms as a large welcome ship with a net!

(The speed of entry into the atmosphere can be low by "going with" the motion of the Earth. By inertia it's known that this costs almost the same/no more than going against a planet's motion to land a payload.This is one principle being considered in landing on Mars.

Another option would be to control the reentry of the small capsules by the ground lasers, much easier for lighter payloads than deorbit of machines like rockets.)

For power for the bots and laser near the asteroid, here again power of conventional type might be used, all by way of much cheaper laser sourced 3d ink and printers from earth.


 The Moon and Beyond

 There's been real contention here in 2019 about who will reach the moon and get "oil rights" to the lake of ice water that has been found frozen on the moon at the poles. This has been believed to be the cheapest way to get to mars because it would seem cheaper to go to the moon first and use the water for rocket fuel, air, and drinking water than to boost the huger cost of the same rockets direct from the earth to mars.

 Because the "rocket fuel" on the moon is much lighter there with the moon's lighter gravity, overall it's been considered much cheaper to boost smaller rockets to the moon first to a sort of cosmic convenience store and then use much larger boosters on to mars even with just a lake's worth of water.

 However the laser/self assembling printer to print the return laser etc method as above would be far cheaper and easier for this use, because a single asteroid has 1/5 the water in all of the oceans of the earth so this would be a far cheaper source of fuel, water, and air.

 And we could also move the asteroid nearer for use by printing out small lasers near it... it's been well established that even a few small lasers near a mother station by asteroids can generate as much force by ablation of the dust and steam as the space shuttle's boosters outward to move the asteroid.

 Moving asteroids could be done much faster and cheaper by the LTTDP method even so with a few hours not months or years to reach the site.

I believe we may also have near instant connection by way of the EPR quantum entanglement method for more control at a distance. See my Videos on Youtube Encyclopedia Comp Video for how this might be achieved.

 This would be especially valuable for accessing more distant realms e.g. using LTTDP with disproof of Einstein's spooky quantum method for research about the Kuiper belt.

Sunday, June 02, 2019

Where does the proton get its spin and mass?


....The fractional charges of QCD only give 2% of the mass and the gluons are massless.....

Here I consider that the solution is something like dark matter..

My idea about dark matter is that it's much like Stokes believed, Stokes was the great mathematical physicist of the 19th century.

His idea by was that the low energy field connecting up all the cosmos was "like sealing wax" in that it shows strong resistance when strong force or force of short duration is exerted, yet gives way under slow and continued light force exerted on it.

I think of this as valuable, and my version of this involves the recent discovery of the Low Energy Higgs. (LEH) particle in the lab as had been predicted.

So when you jog around the room in hopes of not being so round yet you change your motion, particles have sides, so these small particles exert the force you feel. This would also explain the force of gravity. Like a boat in a river the particles move with you and yet speed up as you fall. The reason they speed up would be because there are also waves between them, the gravity waves, only waves could have cohesion that mere radiant inertia events lack so the gravity radiates in, not out. Note that when you wave your arms in a stream as you flow down the flue, the force you feel on your arms is much like that of inertia as you jog in the exercise machine and change your motion. This is how gravity and inertia, if only loosely are connected, though not in a strong quantum way like Einstein believed about his hopes of repeating Maxwell's triumph of connecting electricity and magnetism. I believe gravity isn't quantum and this is why when you plug in the quantum equations for gravity you get infinities.

 So here's where I look at problems with the particle wave explanation for inertia and gravity as above.

The LEH don't slow everything to a stop with the friction. How is this so? One idea is that the speed of light by use of this method like Stokes might have used gives us the density of the "sealing wax". Light has a huge speed; it's a transverse wave be and it's well known that more familiar transverse waves in physics have a snapback of the "wax" according to the speed. The speed of light is great, so the density of the medium Newton and Maxwell believed in is enormously more than steel. Yet the planets plough through this "wax" without any appreciable resistance. But there's more; Maxwell used the density of the wax to predict the speed of light exactly based on the resilience of the medium Stokes and others considered.

 So there is considerable supporting evidence the particles and waves exist, the LEH and the flat Higgs' field Newton might have considered to be why a bucket "knows" if it's spinning has also been found.

 First of all as I say elsewhere what I call Line Removal (LR) may give a phase change so the inside of a heavy quanta "doesn't know" the outside of the field and this gives it tension that maintains the resilience that Maxwell, Newton and other considered so the particles like heavy quanta don't ever stop spinning.

 I believe that the LEH also are mostly outside the heavier quanta at what I call the Radius Of Action (ROA) a narrow radius that is essentially an area where the outside waves become dense enough to create the particles.

 Even so at more radius they are mostly waves and by the phase change between them they give way with the slow pressure of the sealing wax as Stokes believed.

 The waves can give way like the planets through them yet at the ROA for light the LEH become so strong they cause the huge snapback of Maxwell's method of calculating the speed of light so well.

 So the field has negative entropy used to hold all the fields together so they don't reradiate, resilience by Line Removal, and the particles exert the force of inertia or gravity.

Even so by the waves externally there is no quantum gravity much. Note that these waves and LEH are hard to find.

They're low energy and by Maxwell's method if they are much lighter than light they may move much faster than light. So to the usual quanta like machines used to hope to measure them by more classic methods are much much slower. This would act like the complete continuity of the field Einstein believed in except it is finite so it can't be of infinite speed much less the speed of light it would seem to me. So our machines may sooner or later disprove Einsten about this as in what I call parallel processing sensors that are fast enough and far enough apart to pick up or send out the waves more at the their own speed of resonance.

And here may be how to find dark matter. Its elusive find may be caused by this same high speed and low energy of the medium Stokes considered. This is what it may be and why it hasn't been seen yet!

 This is what I was asking above, Why does the proton have the mass and charge it does? If mass is spinning energy and there is no cause for rest mass in Special Relativity if the heavy quanta spin at c, by using Faster Than Light (FTL) internal spin we have the cause of the rainbow of masses not plus and minus one half.

 "The cause of no cause" of the proton's mass and charge would be a type of dark matter that is also hard to find yet, and even so it may give the mass and spin.

This mass I call it Unobserved Hadron Mass may be generally like dark matter and so I believe things we might learn about how it operates may illuminate our knowledge of dark matter including inertia and gravity!

Wilczic won the nobel prize for calculating the mass of the fractional charges. Even so 97% of the rest of the mass of the proton is unaccounted for.

As I say elsewhere I believe the field inside a supermassive area like a singularity may remove it's own field lines by what I call Line Removal (LR). So while a the quanta around us are created by gravity they become distinct even and as evidenced by the universal conservation of energy. This is why gravity doesn't shield the Earth eclipse after eclipse slowing the Earth or moon down over historic time. Eclipses since ancient times haven't slowed down. The would be because Line Removal wraps the gravity around the heavy quanta beyond a certain level. Einstein believed old electrons might not weigh the same as more recent electrons and experiment has disproven this.

Another way of looking at this is to say because mass and energy aren't completely the same it's much easier to convert mass to energy than vice versa and strong force interactions are only 5% efficient here. So the proton has all the extra mass by spinning faster than light in my explanation by the Line Removal so while some of the spinning field interacts with the fractional charges most of it simply spins past and isn't seen at higher energy as in by probes. So too Einstein's idea about electron's change of mass with gravity mass isn't ultimately the same as energy so the earth has much more of the gravity flowing both in and out from the Earth and around the quanta. In other words if mass and energy aren't absolutely the same since it takes more energy to hold a quantum or the Earth together than for us to fall off the Earth this inequivalence means the proton has a lot more of this spinning mass that holds it together.

We can measure the mass of the proton well. This might also mean the Earth has a lot of extra mass, right?

I believe if mass and energy or gravity and inertia aren't the same an improved description of mass and inertia would be that mass is defined as the resistance to stopping a heavier body that tends to get heavier by gravity and be more at rest while inertia is the tendancy of a lighter body to resist being slowed down. The moon is not able to start the Earth's speeding up while the Earth isn't able to slow down the motion of the moon and it gives way.

By this new definition of mass we might look at how much the moon pulls on the Earth and how much the Earth moves to measure its mass. Note that as with the proton where
most of the field simply spins past the fractional quanta and isn't even much in evidence, most of the extra mass to hold the Earth together would give the Earth more mass than all the quanta of the Earth counted together.

While I'm not a mathematician I know a lot about relativity and machines as you can see. I don't know how to calculate this but if you'd like to collaborate or help with experiments please call me at 276 228 3469. Or you can write me at 138 Longview Village Wytheville,VA. I'd love to put this on more solid basis and we might win prizes. Thanks for reading..

Saturday, May 25, 2019

About Breakthrough Starshot, CME Events, And the Einstein Lens Used To Sense the Surfaces of Earth like Worlds; and A Possible Way To See The Lights of Distant Cities on The Surface of Earthlike Worlds With Advanced CiviIzations, if They Exist....


Here I want to restate what I was saying about the way of finding the CMEs and more for you about how and why this might be most optimal for us..Here I'll also discuss  two new types of telescopes, a gravity lens telescope being considered, and a telescope perhaps light-years in size by my own possible improvements on the Breakthrough Starshot methods also being devised....


CMEs are giant plasmas from the Sun and they may damage the power grid and the internet for years at a time and experts say we're overdue for more CME events. They now know this based on probabilities based on more evidence based on more history than was before!

 Engineers  built the power grid before they knew about CMEs from the historic record so when the power plants were built they didn't know that they should have built them with backup generators like diesel engines. And so CME plasmas are considered a risk because they may cause multiple nuclear meltdowns and slow the power grid or bring it down for years at a time and reduce hospital life support machines, or shut down gas stations so trucks can't send food or goods, and the internet and sattelites may be out for years and other types of infrastructure damage and harm may be caused by the CME.

 On my other video in the my comments area I was talking about how I consider a relatively cheap and most optimal clean up solution (since when I was selling soap on soap operas a month and wow the exercise lady cleaned right up) we could send simple sensors in an array around the Sun; they're made of quanta entangled with quanta we already have here and the EPR faster than light connection Einstein was spooked about may be a  good sensor connection.

 This is related to methods like the Breakthrough Starshot using small starchips, the smallest satellite in the world, Starchips would weigh an ounce or lighter. These super small payloads boosted by lasers like the Starshot method being considered may be a cheap fast way to send sensors  anywhere in the solar system. And  this would help us stop the power grid shutdown without losing billions of dollars and without the cost of false alarms, so we won't have it almost like we had  when a large CME passed by the Earth in 2012.

   About these plasmas I think we could send just a simple EPR sensor which might cost literally $0.10.  It wouldn't really cost much for the fuel to boost it because it's a light weight payload.

As with the Breakthrough Starshot method I believe that these light payloads could simply be sent by focused lasers much sooner than having to wait a half a year to reach the Sun with boosters and at much reduced cost.

And as I say on my other video about the Breakthrough Starshot I think the EPR Einstein, Poldosky, Rosen could be used in combination with the asymmetrical collapse of the wave function in series as a highly efficient and lightweight way to decelerate the sensors so they don't just speed right on, past the sun or Proxima B, and our image isn't as high resolution otherwise (Proxoma B is the Earthlike world recently found orbiting Alpha Centauri, the nearest star).

This use of the collapse of the wave function is being considered by some as a super efficient battery, storing energy with mass energy level efficiency, sort of like the matter antimatter conversion levels, these are far higher than fission levels which only convert 5 percent of mass to energy.

 Unlike antimatter, storing and transporting uncollapsed quanta would be much easier even if the output wouldn't be as extreme.

 We could send the chips more slowly with conventional boosters and put the sensors into orbit around the sun if, as some believe the lasers may not be optimal for this use.

 While it may cost billions to shut down the power grid for a while, this would usually be cheaper than false alarms that might cost billions more with more expensive or more unreliable sensors since experts say the power would need to be shut down each time a CME may be headed our way. Shutting down the power lines is considered to be our best option by reduced resonation with the plasma just without each false alarm so the risk of CME harm is reduced at the lowest cost and shutting down the power when we know a CME is headed our way is also viable.

 Other hardware like transformers that are being built are much more expensive and would be more time consuming than this EPR sensor laser boost method.

 When you compete with a machine like a chess computer, if there's any move that can lose the match the chess machine will use most of its time and resources (if not more and more!) stopping the one event. We haven't learned much from how the chess computers beat human players as was believed so humans would learn more savvy methods of play when they were being devised. Even so if we could lose so much with CMEs,  I would say that at least we could learn some valuable general maxims from the machines about life. And this might be true, if we can lose all the prize, then it's wise to spend a lot of time considering our defense, against CME's or other issues if so.

Finally I want to discuss the recent plan to send a fleet of sensors to a focal point of Einstein's gravity lense of the sun. Simple geometry shows this will give us real images of the surface of Earthlike worlds, not a one pixel world seen by our machines here in 2019. While insight is good, sight may enlighten us more...

 I believe the use of the Starshot methods as above, starchips, lasers, plus EPR connection and braking by the wave function, may make it cheap enough that we could send a swarm of the starchip sensors in a 360 swarm all the way around the sphere of the sun with lots of focal points of many Earthlike worlds and the universe and a lot of cheaper images. And in just a few hours at Starshot speeds we could begin our research plus real time control and not have to wait more than 10 years while sending larger old fashioned satellites to just one zone as in the method being considered...

It's been calculated that a telescope a million times the size of Hubble would be enough to see the lights of the cities of an advanced civilization on the surface of distant worlds if they exist. This was how I originally concieved it,  a telescope perhaps light years across more outside the solar system used by  starchips by these methods and unifying the signal of all these sensors so even more resolution would be seen than the Einstein lens method above. This telescope would be more a giant sphere than a gravity focus lens but it also might be any concievable size, even light years. Even so for the time being the gravity lens method might be of worth while we consider building these more giant machines.

Thanks for Reading my site, read more as much as you like..Thanks.


Saturday, May 11, 2019

A Way to Send Cheap Payloads to Mars in Hours By Using, LIGHTER yet More Payloads On a Common Basis; Setting Up A Link to Mars and Widening our Connection "Based on Breakthrough Starshot" And More!



I was reading in Discover magazine about how it rains diamonds on Uranus and Neptune and also Jupiter and Saturn by another process. The method of high pressure at the right level and the cleansing out of the hydrogen any impurities is considered perfect for making diamonds.


Click Here or see link below for a Wash. Post site about this.


I had thought of methods of extracting samples from the surfaces of distant worlds related to the methods being used of blasting asteroids and catching the stardust or stone blast and then bringing it back our way.

 My earlier idea was to set a small lever on the tip of the starcraft sent to a realm like Mars or Venus. The probe goes down to the surface at the right speed (this can be slow enough if the machine "goes with" the orbit of the massive planet in front of its motion so it lands at anywhere from almost 0 to higher speed).

 When the probe impacts the surface the lever bounces up the scooped out sample from the surface to be sensed, up to the orbiting collector (where's no space junk collection!). Or it could be blasted all the way to us by the lever since most of the cost of sending payloads like to mars or the moon is in fuel (no fuel needed other than one way) and inertia does the rest.

This method would be simple and cheaper and the sample might be less tainted by the blast of the explosion of the other method
or it would have advantages of its own.





At any rate thinking of how to extract return samples from distant lands and waves may be useful.

 I began thinking about how it might be possible even to extract the diamonds from Uranus or other planets.

 First we need a cheap way to get payloads to those distant lands of investment, platinum VISA, and cash above...

It seems lasers might be of worth if we used lots of small payloads like in the Breakthrough Starshot method, with some important changes.

 I think using a laser as in the Starshot be a cheap method to send materials to the future Mars soap opera stars, they say they might pay for it with a soap opera or a raffle, how much is my Bitcoin pizza worth 50,000 worth!

 The exact method would be to make the laser more self focusing by putting a magnetic field around it and using a special torus instead of the starchip sails of the Starshot method.

 The torus has a light payload perhaps just a few grams but since no huge fuel costs weigh it down its cost per payload unit is cheap enough to send even a constant stream of precious materials like rocket fuel or food or 3d printers and ink to or from a distant world.

 The torus has a magnetic shield to give it either traction returning or cheaper high speed propulsion outward bound. The magnetic field mostly induced in the torus also would shield the payload from cosmic rays. And from entry if we might want to visit and so send supplies to Mars in more than just a few areas.



 And about the diamonds? First I considered the possible use if tractor beams but as I will relate here below, drones to drill or etc may be more feasible with current technology.

 Even so I consider the use of tractor beams which because of this I consider here mostly for completeness..

This involves what might be the second part of this plan extracting the sample from the "surface" of a distant world by using something like magnetic laser tweezers as NASA is researching about "tractor beams" and I mention several types of tractor beams on my other post -there are more!

 Already there are underwater tractor beams that work well and I think lasers combined with magnetic fields might be of value to modulate the wavelength of the resonance. One of my ideas about tractor beams was to use a magnet on the distant mass we want to move with a magnet nearer used to cause the adhesion.





 Another idea is to resonate a standing electron wave to oscillate and zero in on the Van de Wals force on the outside of the mass to move as of value and more for general use for mass without a magnet and then multiply the resonance like the wave tractor beam by choosing the right wave resonance. And this would work for more than just the masses with the magnet.



 To extract even the distant diamonds I believe a matter wave beam from many convergent sources (of the machine or machines) may be of value like the Gamma Knife used in brain surgery with more than 200 converging lasers (of lower to higher energy when they meet). The lasers of the Gamma Knife are so low in energy they don't even trim the haircut of the patient and the patient walks out of the ER in a few hours after brain surgery.

Except for a tractor wave that would operate even to remove matter like the diamonds, the lasers would be replaced with matter waves, well known from Quantum Electrodynamics one of the (second) most high resolution methods in physics. We know the mass and charge of the electron to more than 50 decimals and its evidence about the matter waves.

 My idea is that since the matter waves mostly go in the spaces between the quanta we could send them to converge and do useful things where they meet. E.g. it might make a good sensor while in real time and much the same space it could sense every atom in the body while changing enough of the electrons by ionization where the sensors sense and meet the cancer DNA electrons to someday be a complete and rapid cure.

 Here it seems possible though more conjectural about the diamonds or other uses that the matter wave beam could be combined with a magnetic beam which also isn't so quantized to be a form of tractor beam that might also be used to retrieve the diamonds or for other use like to prospect for minerals or heat in geology..

 So this is possible; we send the payload on the laser. It has enough mass to self assemble above the  area from where we might want to retrieve the diamonds. It self assembles into a small 3d printer.  More"ink" is sent cheaply to build a larger printer; more ink yet and we have something like a "matter wave tractor beam" as above.

 While this part about the tractor beam of this type is the most conjectural here it seems possible.

 If so it would allow entrepreneurs to someday send the machine to Neptune in a few hours at near the speed of light as in the Starshot method, and it would only take a few hours not years to reach the Kuiper belt and the Oort cloud. Then the machine is built by the printing methods as above. And in a while the diamonds are being sent to us at an extreme profit for a days labor!

Using the tractor beams wouldn't be as  probable with today's technology so I consider to use the laser and small payloads as above and use a drone to drill down. A laser is printed out with the drone that mines the diamonds or etc. to return the sample either directly to us or up to the orbiting station already printed out. Another option would be building a chemical booster to return the sample to orbit. These methods might allow unlimited cheap high speed sample returns from any moderately close distance! This might even allow sample returns from the sun.

Samples are returned by printing out a large enough laser at the distant zone to return the payloads to us or by printing out more conventional rockets to return people or etc. The main limit is about the size of the payload and the cost per pound. Even so far cheaper than by other methods.



The amount of ink we could send by cost would be a limit on some machines we build but this might be made more economical as we improve the method.

One problem is about the need for real real good aim and this might need to be solved "only once" since the printer could print out larger nets like e.g. a magnetic bubble plus a laser to steer the incoming ink or other outbound stuff from here. It could be printed out near Mars or other area where we might want to use these methods.





 One advantage of the best of this is about colonizing Mars. Its been said there is no known way to return the Martians to Earth from events as in Mars One that are considered here but the ability to send an unlimited stream of materials to Mars on demand would be a valuable life link. For getting started we might send a small self assembling machine that assembles into a small 3d printer then ink is sent to build a larger printer and so on. Now the machine is on the surface where it prints out the rocket tanks and to build the return rocket all the while ink and then rocket fuel is being sent by the laser torus method drop by drop and much cheaper than any other method yet known. All this could be done before the astronauts are sent to Mars and their return is more assured.

 If an emergency arises or to speed up the colonization events the number of laser supply lines might easily be multiplied up manyfold when needed. Provided some method of retrieval of the payloads e.g. an inflatable or magnetic net was viable there would be something we could do and save the Mars event if there was an emergency and much boost our colonization and R and D efforts in general.

I imagine that 3d printers could build habitats, and bulldozers printed from the ink would then cover over these boxes with an airtight radiationproof shield of mars soil. And in addition supplies of many sorts, food, air, water and many conveniences would be in reach and a large Mars cities could be built complete with return transportation arranged a lower cost than Uber! This would be before the settlers are sent to Mars.

The plan to live off the land of Robert Zubrin using known materials on Mars, while much tougher than this to do is not mutually exclusive. A combination of both plans might be optimal for more savings.

As I say on my video link below I think we would first want to terraform Mars cheap by spearing a magnetic bubble to one of the satellites of Jupiter and use Jupiter's magnetic field to send it at high speed to Mars crashing it in for air and water and materials etc and even to speed up the spin of Mars a bit so no "jet lag" by crashing the moon into the edge of Mars to speed it up just a bit. (The rover mission technicians found with each Mars 24 hour day with a few minutes more taking a major toll.)


 I believe we may also be able to use another large mass like an asteroid with a magnetic bubble added on to shield Mars more from the cosmic rays. NASA is considering using an inflatable magnetic shield for this at the Martian L5 but I consider it more flimsy than a more stable foundation like this and built to last. If we want a real colonization we want our results to endure more for the ages.

Even if we colonize Mars cheaper in years not centuries by this method, other materials cheap by the light payload/laser method above would also be of general value a cheap supply line to Mars in just 4 hours not months.

Here's the Link to the Washington Post Story about Raining Diamonds on Neptune


Here's my video link (the best
Link I can Find) about "A Cheap Way to Colonize Mars in Years Not Centuries" or you can do the search; https://www.google.com/search?q=a+much+cheaper+way+to+colonize&oq=a+much+cheaper+way+to+colinize&aqs=chrome.1.69i57j33.36978j0j4&client=ms-android-sprint-us&sourceid=chrome-mobile&ie=UTF-8

Couldn't quite find the link, hope this may help..

Monday, May 06, 2019


ABOUT The SLOWING of STARS and The SPEED Of GRAVITY


I say in my physics synopsis, see the link upper left of my web version, yes the Mandlebrot set is real! I believe gravity isn't relativistic. The Earth is more at rest than the moon and the sun is more yet at rest. So the more priveliged mass is more influential and different masses fall at different rates if you apply the same force to two masses they go upward to different heights and fall down at different rates. And in the gravity elevator no frame of motion will transform away the separation with time of two masses dropped unlike in Einstein's inertial elevator. At t1 and t2 etc. the masses move apart in the gravity elevator, and all observers agree on this yet because both masses are in uniform motion in the inertial elevator some observers can get a uniform motion result.

 So I agree with Van Flandern that if the measured displacement of the Earth's gravity is extremely limited this gives a lower limit of at least 20 billion times the speed of light. Or perhaps by my use of Maxwell's method of the lighter the weight the faster the speed, the method he used to predict the speed of light exactly, this gives a speed of 10x10 to the 37th times the speed of light, you lighten up to travel fast.

Since Einstein like Mach believed gravity and inertia are essentially the same, I believe what LIGO has found is only the speed of inertia.

  So too if gravity is essentially non relativistic the supposed proofs of general relativity if different masses are supposed to fall at the same rate are actually evidence that masses fall at different rates like the Earth around the Moon, well with global warming at any rate!

 The displacement of the perihelion of Mercury the bending of starlight and yes even the rate at which pulsars might slow down all are evidence of the changing rate of fall of light, Mercury and other masses even while Einstein holds that different masses fall at the same rate in his theoretical foundation of general relativity so that inertia and gravity are the same. As I say I believe here Einstein is assuming what he's trying to prove by f equals ma which is the more general formula when you apply the same Force to two different masses they move at different rates. I believe that if the relativity of gravity is true the Earth would indeed fall around the Moon at the same rate as the moon around the Earth and if the universe rotated once each day in relative motion there would be hugely faster than light motion for the cosmos and hugely different angles of the motion as we might imagine.

So if LIGO has found something to do with gravity I believe what it's actually found is only the speed of inertia not near zero displacement of gravity as we measure it towards the sun.

And what about the speeding pulsars rate of slowing down, right!

 I would believe since gravity radiates in as with LIGO result where it seems the gravity radiates out what's really being measured is only the outward radiance of the inertial particles which would only move at the speed of light because they're particles like Einstein believed for the speed of light in special relativity where the quanta of light in special relativity is uninfluenced in its path and completely constant.

 So if LIGO is actually measuring inertia we might expect it to be at the speed of light. As I say though if gravity might be much faster than light as Van Flandern believed, LIGO and the speed of the pulsars may both be measures only of the speed of inertia and the prize of events like much faster communications by way of gravity may await other machines  we may build as I say elsewhere.

As I say about the pulsars they may be radiating inertia and we're not measuring gravity as they change the rate of spin.

 About Van Flandern's "observation of the observation" that the  displacement of gravity is almost zero between the sun and Earth, if the speed of the gravity between the pulsars was only at the speed of light there will be a different value of the displacement with changes in the location of the source of gravity. If we look
at triple pulsars I think this might help us find the speed of gravity not just the speed of inertial radiation which Einstein holds would be only at the speed of light. Because we measure a change in the motion of the center of mass of the two pulsars in the center the change not of mere radiation yet of the speed of which the information between the central changes and the external resulting motion of the outside pulsar will give us the speed of gravity more definitely even than LIGO or other methods.

 We want the line of gravitational connection of the pulsars to be in the orbit at the nearest the right angle to our line of sight when the influence of the events the inner pulsars would be seen.(The right angle is so the distance to our sensor is the same for both events so the distance if more to see the events doesn't influence the result by the slower speed of light used to measure the influence between the stars. If one pulsar was more distant in its orbit by a few light years in our sight this could throw off the underlying connection of GWD. The cause of the event might be an explosion from incoming matter that might be fused or superfused, superfusion is the possible cause of the Jets of cosmic realms that fusion is without cause. The superfusion would spin at Faster Than Light to withstand the gravity of massive sources so energy conservation is saved and it's possible there may be super fusion of events of pulsars, or at any rate fusion of this ingoing matter. Common fusion of asteroid showers are what I attribute the otherwise anamalous events of Tabby's star, some even attribute to the possible influence of other advanced civilizations at that realm of the events).


If the speed of gravity is much faster and the speed of the inertia measured by LIGO is only at the speed of light we might expect to see first the influence of the gravity and then if the pulsars are separated by 8 light minutes only then would we see the influence of Einstein.

 This idea might also be applied to large masses over more cosmic distance.